Ubiquiti LiteBeam AC Gen2 airMAX ac CPE

Product Specifications:

Channel Sizes:

PtP Mode: 10/20/30/40/50/60/80MHz

ESD/EMP Protection: ±24kV Contact / Air

Dimensions: 358 x 271.95 x 272.5mm (14.09 x 10.71 x 10.73″)

Weight:

Without Mount: 800g (1.76lbs)

With Mount: 980g (2.16lbs)

Gain: 23dBi

Networking Interface: (1) 10/100/1000 Ethernet Port

Processor Specs: MIPS 74Kc

Memory: 64 MB DDR2

Power Supply: 24V, 0.3A Gigabit PoE Adapter (included)

Power Consumption: 7W

Power Method: Passive PoE (Pairs 4,5+;7,8 Return)

Supported Voltage Range: 24V±10%

Operating Frequency: 2412 – 2462MHz / 5150 – 5875MHz

LEDs: Power, Ethernet

Enclosure Characteristics: Reflector (SGCC 0.6T) / Plastic: PC

Mounting: Pole-Mounting Kit (Included)

Wind Loading: 275N @ 200km/h (61.8lbf @ 125mph)

Operating Temperature: -40 to 70°C (-40 to 158°F)

Operating Humidity: 5 to 95% non-condensing

Certifications: CE, FCC, IC

PtMP Mode: 10/20/30/40MHz

Wind Survivability: 200km/h (125mph)

Product Includes:

1 Gigabit PoE (24V, 0.3A) with Mounting Bracket

1 Power Cord

1 Quick Start Guide

1 Antenna Feed

1 Feed Receiver

1 Central Reflector Panel

2 Side Reflector Panels

1 Knob Kit

Description

Ubiquiti Networks LiteBeam AC Gen2 airMAX ac CPE

Shop for Ubiquiti Networks LiteBeam AC Gen2 airMAX ac CPE in Nairobi, Kenya from Routine ubiquiti dealers

Overview

With tighter beamwidth, the LiteBeam AC Gen2 Airmax ac CPE with Dedicated Management Radiofrom Ubiquiti Networks offers a more reliable long-distance point-to-point connection. This LiteBeam radio is designed to filter out noise to reduce interference in areas congested with multiple RF signals. Setup is simple thanks to fully adjustable hardware allowing for adjustments to be made along both axes as well as a built-in bubble level to ensure the radio is mounted properly.