Description

Ubiquiti Networks F-POE FiberPoE Optical Data Transport for PoE devices 1 Gbps SFP Port; 1000 Mbps* Ethernet PoE Port

Shop for Ubiquiti Networks F-POE FiberPoE Optical Data Transport for PoE devices 1 Gbps SFP Port; 1000 Mbps* Ethernet PoE Port in Nairobi, Kenya from routine ubiquiti dealers.

Description

Ubiquiti F-POE FiberPOE Fiber + Power Solution for Outdoor PoE Devices

Overcome PoE limitations with the Ubiquiti FiberPOE. The FiberPoE is a low-cost solution for outdoor deployments that require long-distance runs to reach the PoE device. Deployments with the FiberPoE also provide significant EMI and ESD protection over typical PoE installations.

Separate Data and Power Transport

Ubiquiti F-POE FiberPOE is ideal for indoor or short-run installations. However, for outdoor, long-distance installations, PoE becomes vulnerable to EMI and is limited to 100 meters with correlated power loss. With the FiberPoE, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs.

The Ubiquiti F-POE FiberPoE provides Gigabit bi-directional data transport between twisted-pair Ethernet cable and fiber optic cable, and injects DC power to the Ethernet cable for passive PoE. Use one FiberPoE device as an Fiber‑to‑Ethernet Converter, or a pair of F-POE FiberPoE devices to create a Fiber Bridge.

Fiber Optic Data Transport

Using fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI). Data integrity is also sustained in runs beyond 100 meters, the limit of Ethernet over twisted-pair cable.

The Ubiquiti FiberPOE supports a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.

Q: What is the main purpose of Ubiquiti’s new F-POE FiberPoE™?

A: The FiberPoE connects remote PoE devices and provides data and power using fiber and DC cabling.

Q: What makes FiberPoE™ different from other PoE devices?

A: PoE is ideal for indoor or short-run installations. However, for outdoor, long-distance installations, PoE becomes vulnerable to EMI and is limited to 100 meters with correlated power loss. With the FiberPoE, data and power are transported on separate cables to greatly improve data integrity and enable much longer cable runs.

Q: What kind of power options does the F-POE FiberPoE™ offer?

A: The FiberPoE allows separate power from standard Ethernet cables or standard terminal block / power cable support. There are three ways to configure the input and output power:

1. Data in (SFP) – data electronics protected (passive optical signaling)

2. Power in – through terminal block or RJ45

3. Short shielded PoE connection to devices

(This device supports a 1G SFP module and 24V or 50V power from a DC power cable or PoE cable.)

Ubiquiti F-POE FiberPoE Mounted

Q: What are the advantages of the fiber optic transport feature of the FiberPoE™?

A: Using fiber optic cable for data transport significantly reduces electrostatic discharge (ESD) failures and electromagnetic interference (EMI) over typical PoE installations. Data integrity is also sustained in runs beyond 100 meters, the limit of Ethernet over twisted-pair cable.

Q: What level of throughput is possible with FiberPoE™?

A: The FiberPoE provides Gigabit bi-directional data transport between twisted-pair Ethernet cable and fiber optic cable.